Colors :Blue,White,Black,Gray ...
Non-flammability : Corriboard can be extruded with flame retardant additives to meet customer’s flame retardant requirements. e.g. The typical requirement for temporary protection sheets - LPS 12O7 - Fire Requirements For Protective Covering Materials. N.I.P. Certificate No. 341a. Other FR standards applicable.
PRINTING- Corona 38-50 DYN : where Corriboard is to be printed on or to be glued, it is necessary to etch both surfaces during the extrusion process. Sheet is tested on line to a minimum dyne level of 52 dynes.
ESD Additive sheet : These sheets can be produced on only black colour. Its surface resistance must be OHM.
Resistance to weater conditions : Corriboard requiring extended outdoor life must be UV stabilised. Assuming normal weather conditions for in Turkey, stabilised Corriboard will last from 5 to 7 years.
Production : Corriboard can be die cut, hot-air welded, ultra-sonically welded, glued and stapled.
Filled Grade : Talc filled grades are available to enhance the performance of the sheet i.e. greater rigidity, surface smoothness and thermal stability.
|Corrugated Plastic||Corrugated Paper||Molded Plastic|
|Project Development||Fast & Inexpensive.||Same as corrugated plastic.||Very Expensive.|
|Durability & Strength||Lightweight. Tear & puncture resistant.||Tears easily.Punctures easily.||Heavy. May crack with strong impact.|
|Cleanliness||Leaves no dust or residue in environment.||Can leave dust in environment or equipment.||Same as corrugated plastic.|
|Cost||Long life span. Reusable. Significant long-term savings||Short life span. Must be replaced often. Per cycle cost expensive.||Same as corrugated plastic.|
|Lead Time||Production is very fast.||Same as corrugated plastic.||Lead times on new products as much as 5 times longer.|
|Waste||Reusable and recyclable waste is very minimal.||Reoccurring waste and disposal cost.||Same as corrugated plastic.|
|Custom||Simple and fast.||Same as corrugated plastic.||Difficult and slow.|
|Work Interruption||Less downtime due to long-term reusability of container.||Downtime and interruption due to broken containers.||Downtime and interruption due to broken containers.|
|Moisture||Waterproof. Unaffected by most chemicals.||Breaks down or destroyed.||Same as corrugated plastic.|
|Color||Variety of colors in stock. Custom colors available.||Brown or white.||Limited colors in stock.|
Printing: Where Corribord is to be printed on or glued to , it is necessary to etch both surfaces during the extrusion process.Sheet tested on line to a minimum dyne level of 52 dynes.
ESD Addtive sheet: These sheets can be produced on only black colour. Its surface resistance must be OHM
Non-Flammability:Coriboard can be extruded with flame retardant additives to meet customer`s flame retardant requirements. e.g. The typical requirement for temporary protection sheets- LPS 1207 - Fire Requirements For Protective Covering Materials. N.I.P. Certificate No. 341a. Other FR standards applicable
Production:Corriboard can be die cut , hot-air welded ultra-sonically weldwd, glued and stapled.
Weathering: Corriboard requiring extended outdoor life must be UV stabilised Assuming normal weather conditions for the UK stablised Corriboard will last from 5 to 7 years.
Filled Grade: Talc filled grades are available to enhance the sheet i.e. greater rigidity , surface smoothness and thermal stability.
|Width||Min Gsm||Max Gsm|
|2 mm||300 Gr/m2||600 Gr/m2|
|2,5 mm||400 Gr/m2||750 Gr/m2|
|3 mm||450 Gr/m2||1000 Gr/m2|
|3,5 mm||550 Gr/m2||1250 Gr/m2|
|4 mm||650 Gr/m2||1500 Gr/m2|
|5 mm||900 Gr/m2||1750 Gr/m2|
|6 mm||1200 Gr/m2||2000 Gr/m2|
|8 mm||1500 Gr/m2||2500 Gr/m2|
|10 mm||2000 Gr/m2||3000 Gr/m2|
|Min. Width x Length 600mm x 600mm|
|Max. Width x Length 2100mm x 6000mm|
|special PP weight||ISO 1183||gr/cm³||0.907|
|water absorbtion||ISO 62||%||0.02|
|Air index||ASTM D696||mm/m°C||0.18|
|Thermic inflexion temp.||ISO 75||°C||78|
|Thermic inflexion temp.||ISO 75||°C||52|
|vicat softening temp.||ISO 306||°C||148|
|vicat softening temp.||ISO 306||°C||78|
|Mechanic Qualifications - 1|
|drawing resistance||ISO 527||MPa||38|
|split point||ISO 527||%||800|
|stretch index||ISO 178||MPa||1250|
|impact resistance||ISO 180||kJ/m²||80|
|Shore hardness||ISO 868||-||66|
|Mechanic Qualifications - 2|
|comparasion of maximum||2,1mm/350gr||N/cm²||Min. 3,7|
Dielectric static ( at 1MHz’)
division rate (at tg δ 1 MHz )
dielectric resistance ( 500 V/sec)
|ASTMD 257||Ω||Ca. 1013|
|ASTMD 150||--||‹ 5×10-4|
|Product description||Corrugated Plastic sheet|
|Dimensions and Physical Status||Twin wall
Thickness: 2-8 mm Weight: 250-1800 gr/m²
|Physical Features||Solution Point
|160 - 175 °C
145 - 155 °C
> 300 °C
|Reactions with other materials||they are not chemical effective, dont require a special precaution|
|Transportation & storage||shipping classification
requires climate tepmarature at storage
|Processing & Measurement|
Be exposed to oral passage
|It is a polymere heavy with high molecular and is not a health thread for operators.
resin is not harfull but with additive integrants it can be hazardous. please aavoid breathing !
|Fire & Explosion İnformation|
|Automatic firing temparature
|> 360 °C
H2O ve CO2
water, mist,foam, CO2, dust etc.
|Toxicological info||PP corrugated sheet is certainly not effective and harmfull to environment.|
|Waste||Waste should be disposed by burning at determined regions or under approved status.|
|Reusing info||Corrugated sheest can be rcycled more easily when compared with other materials.|
1) Excellent Mechanics Property :
Because of special structure of corrugated plastic sheet, it has excellent mechanics performances as follows: strong and good toughness, impact resistance, high compressive strength, buffer shock, very high hard, good bending properties and long-time durable.
2) Light Weight & Materials Saving:
Corrugated Plastic Sheet has excellent mechanics property, if up to achieve the same result with it, extruding corrugated sheet is with low cost, materials saved, light weight.
3) Heat and Sound Insulation :
Corrugated plastic sheet has excellent heat and sound insulation because of its hollow structure, which makes the performance of heat and sound transfer much lower than solid board.
4) Anti-static, Conductive and Flame Retardant:
Taking modified, mixing and surface spraying etc methods to make corrugated plastic sheet with properties such as anti-static, conductive and flame retardant.
5) Stable Chemical Property:
Corrugated Plastic Sheet has obvious advantages such as chemical resistance, water proof, moisture resistance, excellent weather ability, anti-corrosion, fade resistance etc comparing with carton board or wooden board.
6) Smooth and Beautiful Surface and Various of Colors Available:
As for its special extruding technology, corrugated plastic sheet can be produced with various of colors through changing master batch’ color. Excellent surface for painting and inks jet easily.
7) Environmental Friendly:
Corrugated Plastic Sheet has the property of non-toxic and no-pollution etc, so it can be disposed simply without any pollution to the environment. Meantime, it also can be used with recycling.
We hereby confirm that raw material which is used for production of corrugated sheet is suitable with followings:
AUSTRIA: ‘K.V.’ N° 775, 23/09/1994 approval letter UZ 17639-45/92
BELGIUM: Arrete Royal du 25 Aout 1976( amended by Arrete Royal 24/7/1992
DENMARK: Sundhetsministeriets bekendtgoreise N° 931 of the 6/12/95.
FINLAND: KTM, Paatos 397/94 and following updates.
FRANCE: Matériaux au contact de denrées alimentaires destinées a l` alimentation humaine. Brochure n° 1227 édition Janvier 1994 ( as updated ). Arrêté du 14 Septembre 1992. (like amended.)
GERMAN: BgvV RecomNo: 307 of 1991
ITALY: Regulated from Decreto ministeriale del 21/3/1973 ` 26/4/1993 to D.M.N° 220 and following updatings.
LUXEMBOURG: Règlement Grand - Ducal ` - 11/6/1991. Pages 1/2
NORWAY: Kongelig Resolusion 11 March 1976 and following updates on 21/12/1993
PORTUGAL: 13/09/1995’in Portaria ` N° 1114/95
SPAIN: Regulated by (Resolucion de )4/11/1982 Real Decreto on 2207/1994- 16/11/1994
SWEDEN: Nourishment Regulation: amended like SLV FS; 1993; 18`, 16/12/1993
NETHERLAND: Verpakkingen en Gebruiksartikelenbesluit ` ( Warenwet ) : ` Regeling ` 21/08/1991.
begining 167 of 29/8/1991 and following supports.
UK: Plastics for food contact applications ` Revised ed. 1986.` Statutory Instruments,
1992 N° 3145 ` and following amendments.
USA: For the situaitions of A usage in whinch includes H, FDA parts 21 § 177.1520 ( a ) ( 3 ) ( i ) ve ( c ) ( 3.2a ) 21 CFR 176.170 ( c )’ chart2. all food sorts are same as listed at 21 CFR. According to our information Chart 1, all the other ingredients are used as frmulated by FDA regulations and 21 CFR 177.1520 ( b ).
SWITZERLAND: KsV, 26 June 1995. approval letter Re. : 8.21. - 325 BM
Approval letters was performed basing on the staples without any additive ingredient (color, AS or UV). above stated informations was fulfilled according to current knowledges. These titles dont imply any warranty regarding from producers to third parties. Users should comprehend above information as a guide book to decide precautions for environment protecting and keep materials in safe.